Server - support.geosc.uh.edu

 

Note: Support refers to the http://support.geosc.uh.edu website.

Setting up your Personal PC to print on the TA printer

 

  1. To setup your PC first download and install the Printer driver from Support, software downloads section

 

 

  1. Then open up control panel and do an add printers, make sure you select “Local Printer”

 

 

  1. Next select, Create a new port and select TCP/IP port

 

 

  1. Click Next a few more times and when you see this screen, key in “129.7.52.10” (this is the internet address of the TA printer)

 

 

 

  1. When you click “Next” you will get a pop up asking you to select the driver , at that point click on “Have Disk” and point to the folder where you extracted the driver, Usually c:\2125psw2k

 

 

 

  1. At which point click “OK” and you will get a window asking you to confirm, click “Next” a few more times and you should be done.